£638.40
Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators for storing fluids. HYDAC diaphragm accumulators are based on this principle, using nitrogen as the compressible medium.Diaphragm accumulators consist of a fluid section and a gas section with the diaphragm acting as a gas-tight separation element.The fluid section is connected to the hydraulic circuit so that the diaphragm accumulator draws in fluid when the pressure increases and the gas is compressed. When the pressure drops, the compressed gas expands and forces the stored fluid into the circuit. Set into the base of the diaphragm is a valve poppet. This shuts off the hydraulic outlet when the accumulator is completely empty and thus prevents damage to the diaphragm.
Nominal Volume – 1.4 ltrs.
Operating Pressure – 330 bar
Pressure Ratio – 8:1
This consists of:
– welded pressure vessel, rechargeable on the gas side or, alternatively, completely
sealed. Fluid connection available in various types.
– flexible diaphragm to separate the fluid and gas sections.
– valve poppet set into the base of the diaphragm.
Available on backorder
Available on backorder
Available on backorder
Available on backorder
HYDAC Standard Diaphragm Accum...
£638.40
