Available on backorder
Sale
EPE (BS-10-E-B-360-A-7-G-6-C-P-240C) Standard Accumulator Safety Block
£360.00
The EPE range of safety blocks BS is available in sizes NG10, NG20, NG25 and NG32. The safety blocks BS combine all the features to protect, isolate and discharge a hydraulic accumulator. The shut-off valve rotates of 90 degrees to instantly isolate the accumulator from the hydraulic system in emergency conditions or for maintenance. Once isolated, the accumulator can be discharged into a tank through a discharging valve with manual or electric controls. In version BS10 and BS20 when switching over the ball valve, the pump flow rate is stopped and simultaneously the accumulator discharged to the tank. During switching all three ports (P, A and T) are momentarily interconnected (negative switching overlap). Ball valves are not designed to be used as flow control valves; therefore they should always be either fully open or fully closed, to avoid damaging the sealing cups. The system security is ensured by a pressure PED an anti-tempering pressure valve certified CE/PED. The safety blocks BS allow easy and secure connection of an accumulator to a hydraulic system. Suitable for use with all types of bladder, piston and diaphragm accumulators, the compact and multi function design allows saving space and reducing the wiring.
Available on backorder
Sale
EPE (BS-20-E-B-360-A-7-G-6-C-P-240C) Standard Accumulator Safety Block
£360.00
The EPE range of safety blocks BS is available in sizes NG10, NG20, NG25 and NG32. The safety blocks BS combine all the features to protect, isolate and discharge a hydraulic accumulator. The shut-off valve rotates of 90 degrees to instantly isolate the accumulator from the hydraulic system in emergency conditions or for maintenance. Once isolated, the accumulator can be discharged into a tank through a discharging valve with manual or electric controls. In version BS10 and BS20 when switching over the ball valve, the pump flow rate is stopped and simultaneously the accumulator discharged to the tank. During switching all three ports (P, A and T) are momentarily interconnected (negative switching overlap). Ball valves are not designed to be used as flow control valves; therefore they should always be either fully open or fully closed, to avoid damaging the sealing cups. The system security is ensured by a pressure PED an anti-tempering pressure valve certified CE/PED. The safety blocks BS allow easy and secure connection of an accumulator to a hydraulic system. Suitable for use with all types of bladder, piston and diaphragm accumulators, the compact and multi function design allows saving space and reducing the wiring.
Available on backorder
Sale
EPE (BS-25-E-B-360-A-7-G-6-C-P-240C) Standard Accumulator Safety Block
£300.00
The EPE range of safety blocks BS is available in sizes NG10, NG20, NG25 and NG32. The safety blocks BS combine all the features to protect, isolate and discharge a hydraulic accumulator. The shut-off valve rotates of 90 degrees to instantly isolate the accumulator from the hydraulic system in emergency conditions or for maintenance. Once isolated, the accumulator can be discharged into a tank through a discharging valve with manual or electric controls. In version BS10 and BS20 when switching over the ball valve, the pump flow rate is stopped and simultaneously the accumulator discharged to the tank. During switching all three ports (P, A and T) are momentarily interconnected (negative switching overlap). Ball valves are not designed to be used as flow control valves; therefore they should always be either fully open or fully closed, to avoid damaging the sealing cups. The system security is ensured by a pressure PED an anti-tempering pressure valve certified CE/PED. The safety blocks BS allow easy and secure connection of an accumulator to a hydraulic system. Suitable for use with all types of bladder, piston and diaphragm accumulators, the compact and multi function design allows saving space and reducing the wiring.
Available on backorder
Sale
EPE (BS-32-E-B-360-A-7-G-6-C-P-240C) Standard Accumulator Safety Block
£391.20
The EPE range of safety blocks BS is available in sizes NG10, NG20, NG25 and NG32. The safety blocks BS combine all the features to protect, isolate and discharge a hydraulic accumulator. The shut-off valve rotates of 90 degrees to instantly isolate the accumulator from the hydraulic system in emergency conditions or for maintenance. Once isolated, the accumulator can be discharged into a tank through a discharging valve with manual or electric controls. In version BS10 and BS20 when switching over the ball valve, the pump flow rate is stopped and simultaneously the accumulator discharged to the tank. During switching all three ports (P, A and T) are momentarily interconnected (negative switching overlap). Ball valves are not designed to be used as flow control valves; therefore they should always be either fully open or fully closed, to avoid damaging the sealing cups. The system security is ensured by a pressure PED an anti-tempering pressure valve certified CE/PED. The safety blocks BS allow easy and secure connection of an accumulator to a hydraulic system. Suitable for use with all types of bladder, piston and diaphragm accumulators, the compact and multi function design allows saving space and reducing the wiring.
Available on backorder
HYDAC STANDARD ACCUMULATOR SAFETY BLOCK (SAF 10 M 1 2 Y 1 T 210 A – S13 – LPI – A9)
The HYDAC safety and shut-off block is a hydraulics accessories element for protection from excess pressure on the fluid side and for the shut-off and relief of hydraulic accumulators. It takes into account the applicable safety regulations according to DIN EN ISO 4413 and the German Industrial Safety Regulation (BetrSichV). The HYDAC pressure relief valve (DB12) is used in the SAF series. It is a directacting pressure relief valve in poppet valve construction with excellent opening and closing characteristics. This version of the DB12 complies with the requirements of the European Pressure Equipment Directive (PED) with CE marking and is supplied with a declaration of conformity and operating instructions.
Available on backorder
HYDAC STANDARD ACCUMULATOR SAFETY BLOCK (SAF 20 M 1 2 Y 1 T 210 A – S13 – LPI – A9)
The HYDAC safety and shut-off block is a hydraulics accessories element for protection from excess pressure on the fluid side and for the shut-off and relief of hydraulic accumulators. It takes into account the applicable safety regulations according to DIN EN ISO 4413 and the German Industrial Safety Regulation (BetrSichV). The HYDAC pressure relief valve (DB12) is used in the SAF series. It is a directacting pressure relief valve in poppet valve construction with excellent opening and closing characteristics. This version of the DB12 complies with the requirements of the European Pressure Equipment Directive (PED) with CE marking and is supplied with a declaration of conformity and operating instructions.
Available on backorder
HYDAC STANDARD ACCUMULATOR SAFETY BLOCK (SAF 20 M 1 2 Y 1 T 210 A – S13 – LPI – A9) (Copy)
The HYDAC safety and shut-off block is a hydraulics accessories element for protection from excess pressure on the fluid side and for the shut-off and relief of hydraulic accumulators. It takes into account the applicable safety regulations according to DIN EN ISO 4413 and the German Industrial Safety Regulation (BetrSichV). The HYDAC pressure relief valve (DB12) is used in the SAF series. It is a directacting pressure relief valve in poppet valve construction with excellent opening and closing characteristics. This version of the DB12 complies with the requirements of the European Pressure Equipment Directive (PED) with CE marking and is supplied with a declaration of conformity and operating instructions.
Available on backorder
HYDAC STANDARD ACCUMULATOR SAFETY BLOCK (SAF 32 M 1 2 Y 1 T 210 A – S13 – LPI – A9)
The HYDAC safety and shut-off block is a hydraulics accessories element for protection from excess pressure on the fluid side and for the shut-off and relief of hydraulic accumulators. It takes into account the applicable safety regulations according to DIN EN ISO 4413 and the German Industrial Safety Regulation (BetrSichV). The HYDAC pressure relief valve (DB12) is used in the SAF series. It is a directacting pressure relief valve in poppet valve construction with excellent opening and closing characteristics. This version of the DB12 complies with the requirements of the European Pressure Equipment Directive (PED) with CE marking and is supplied with a declaration of conformity and operating instructions.
Available on backorder
HYDAC STANDARD ACCUMULATOR SAFETY BLOCK (SAF 8 M 1 2 Y 1 T 210 A – S13 – LPI – A9)
The HYDAC safety and shut-off block is a hydraulics accessories element for protection from excess pressure on the fluid side and for the shut-off and relief of hydraulic accumulators. It takes into account the applicable safety regulations according to DIN EN ISO 4413 and the German Industrial Safety Regulation (BetrSichV). The HYDAC pressure relief valve (DB12) is used in the SAF series. It is a directacting pressure relief valve in poppet valve construction with excellent opening and closing characteristics. This version of the DB12 complies with the requirements of the European Pressure Equipment Directive (PED) with CE marking and is supplied with a declaration of conformity and operating instructions.
Available on backorder
Sale
OLAER/PARKER Standard Accumulator Safety Block (DI 10 EY S 6 350 C V 24VDC)
£360.00
Safety Blocks
Are designed to incorporate in a single compact block a variety of functions necessary for the correct operation of a hydraulic system fitted with accumulators. This includes manual and/or electrical drain, isolation, flow control and pressure relief. Channel cross section : 10 mm (DI 10 block), 16 mm (DI 16 block), 20 mm (DI 20 block), 24 mm (DI 24 block), 32 mm (DI 32 block). Maximum working pressure : 330 to 690 Bar depending on models. According with the fluids of group 2 (PED). Options for ATEX compliant blocks construction carbon steel or stainless steel.
The OLAER safety unit has the functions of safety shut-off, block and discharge of the hydropneumatic accumulator and the system to which it is connected. It meets international safety regulations and specifications for hydropneumatic accumulators, in particular the pressure vessel regulations in force in Germany.
Available on backorder
Sale
OLAER/PARKER Standard Accumulator Safety Block (DI 16 EY S 6 350 C V 24VDC)
£360.00
Safety Blocks
Are designed to incorporate in a single compact block a variety of functions necessary for the correct operation of a hydraulic system fitted with accumulators. This includes manual and/or electrical drain, isolation, flow control and pressure relief. Channel cross section : 10 mm (DI 10 block), 16 mm (DI 16 block), 20 mm (DI 20 block), 24 mm (DI 24 block), 32 mm (DI 32 block). Maximum working pressure : 330 to 690 Bar depending on models. According with the fluids of group 2 (PED). Options for ATEX compliant blocks construction carbon steel or stainless steel.
The OLAER safety unit has the functions of safety shut-off, block and discharge of the hydropneumatic accumulator and the system to which it is connected. It meets international safety regulations and specifications for hydropneumatic accumulators, in particular the pressure vessel regulations in force in Germany.
Available on backorder
Sale
OLAER/PARKER Standard Accumulator Safety Block (DI 20 EY S 6 350 C V 24VDC)
£360.00
Safety Blocks
Are designed to incorporate in a single compact block a variety of functions necessary for the correct operation of a hydraulic system fitted with accumulators. This includes manual and/or electrical drain, isolation, flow control and pressure relief. Channel cross section : 10 mm (DI 10 block), 16 mm (DI 16 block), 20 mm (DI 20 block), 24 mm (DI 24 block), 32 mm (DI 32 block). Maximum working pressure : 330 to 690 Bar depending on models. According with the fluids of group 2 (PED). Options for ATEX compliant blocks construction carbon steel or stainless steel.
The OLAER safety unit has the functions of safety shut-off, block and discharge of the hydropneumatic accumulator and the system to which it is connected. It meets international safety regulations and specifications for hydropneumatic accumulators, in particular the pressure vessel regulations in force in Germany.