Jacktech Pilot operated Check Valve Modular Construction (CIM – 06 AB)
£38.40
Seat type valve in modular construction for vertical stacking assemblies. Hardened metallic seat for leak-free closure.
Interface conforming to
ISO 4401-AB-03-04-A
IS 10187
DIN 24340
Eight models available.
Jacktech Pilot operated Check Valve Modular Construction (CIM – 10 AB)
£69.60
Seat type valve in modular construction for vertical stacking assemblies. Hardened metallic seat for leak-free closure.
Interface conforming to
ISO 4401-AB-03-04-A
IS 10187
DIN 24340
Eight models available.
Jacktech Suction Strainer (SC3-02 X 1/4″ BSP)
£4.80
Jacktech suction strainer are zinc-plated, with stainless steel mesh screens and rugged steel core centers epoxy bonded to the heavy gauge connector and end caps. Suction strainers filter petroleum-based hydraulics fluids, lubricating oil, coolants, fuels and similar applications. They are cleanable and reusable. Clean by swishing in non-caustic solvent, then blow dry from inner diameter to outer diameter with compressed air.
Reusable SS 100 mesh / 149 micron standard. Aluminium die cast nut. Steel cap/support cap. Maximum working temperature 80 degree Celsius. Continuous epoxy bond
Jacktech Suction Strainer (SC3-03 X3/8″ BSP)
£4.80
Jacktech suction strainer are zinc-plated, with stainless steel mesh screens and rugged steel core centers epoxy bonded to the heavy gauge connector and end caps. Suction strainers filter petroleum-based hydraulics fluids, lubricating oil, coolants, fuels and similar applications. They are cleanable and reusable. Clean by swishing in non-caustic solvent, then blow dry from inner diameter to outer diameter with compressed air.
Reusable SS 100 mesh / 149 micron standard. Aluminium die cast nut. Steel cap/support cap. Maximum working temperature 80 degree Celsius. Continuous epoxy bond
Jacktech Suction Strainer (SC3-05 X 1/2″ BSP)
£4.80
Jacktech suction strainer are zinc-plated, with stainless steel mesh screens and rugged steel core centers epoxy bonded to the heavy gauge connector and end caps. Suction strainers filter petroleum-based hydraulics fluids, lubricating oil, coolants, fuels and similar applications. They are cleanable and reusable. Clean by swishing in non-caustic solvent, then blow dry from inner diameter to outer diameter with compressed air.
Reusable SS 100 mesh / 149 micron standard. Aluminium die cast nut. Steel cap/support cap. Maximum working temperature 80 degree Celsius. Continuous epoxy bond
Jacktech Suction Strainer (SC3-150 X 3″ BSP)
£64.80
Jacktech suction strainer are zinc-plated, with stainless steel mesh screens and rugged steel core centers epoxy bonded to the heavy gauge connector and end caps. Suction strainers filter petroleum-based hydraulics fluids, lubricating oil, coolants, fuels and similar applications. They are cleanable and reusable. Clean by swishing in non-caustic solvent, then blow dry from inner diameter to outer diameter with compressed air.
Reusable SS 100 mesh / 149 micron standard. Aluminium die cast nut. Steel cap/support cap. Maximum working temperature 80 degree Celsius. Continuous epoxy bond
Available on backorder
OLAER/PARKER Standard Accumulator Charging Kit (VGU 25/250 8 TS2 3)
Charging sets are used to inflate, check, top-up or vent the nitrogen gas precharge in all accumulators. They are to be screwed to the gas valve or bladder stem and connected to the gas regulator that fits the Nitrogen bottles. They are supplied in a plastic case.
Universal charging set fits most of the hydraulic accumulators available on the market. Maximum working pressure: limited by the maximum operating pressure of the installed pressure limited to 400 bar in any case
Available on backorder
OLAER/PARKER Standard Accumulator Charging Kit (VGU 25/400 8 TS2 3)
Charging sets are used to inflate, check, top-up or vent the nitrogen gas precharge in all accumulators. They are to be screwed to the gas valve or bladder stem and connected to the gas regulator that fits the Nitrogen bottles. They are supplied in a plastic case.
Universal charging set fits most of the hydraulic accumulators available on the market. Maximum working pressure: limited by the maximum operating pressure of the installed pressure limited to 400 bar in any case
Available on backorder
Sale
OLAER/PARKER Standard Accumulator Safety Block (DI 10 EY S 6 350 C V 24VDC)
£360.00
Safety Blocks
Are designed to incorporate in a single compact block a variety of functions necessary for the correct operation of a hydraulic system fitted with accumulators. This includes manual and/or electrical drain, isolation, flow control and pressure relief. Channel cross section : 10 mm (DI 10 block), 16 mm (DI 16 block), 20 mm (DI 20 block), 24 mm (DI 24 block), 32 mm (DI 32 block). Maximum working pressure : 330 to 690 Bar depending on models. According with the fluids of group 2 (PED). Options for ATEX compliant blocks construction carbon steel or stainless steel.
The OLAER safety unit has the functions of safety shut-off, block and discharge of the hydropneumatic accumulator and the system to which it is connected. It meets international safety regulations and specifications for hydropneumatic accumulators, in particular the pressure vessel regulations in force in Germany.
Available on backorder
Sale
OLAER/PARKER Standard Accumulator Safety Block (DI 16 EY S 6 350 C V 24VDC)
£360.00
Safety Blocks
Are designed to incorporate in a single compact block a variety of functions necessary for the correct operation of a hydraulic system fitted with accumulators. This includes manual and/or electrical drain, isolation, flow control and pressure relief. Channel cross section : 10 mm (DI 10 block), 16 mm (DI 16 block), 20 mm (DI 20 block), 24 mm (DI 24 block), 32 mm (DI 32 block). Maximum working pressure : 330 to 690 Bar depending on models. According with the fluids of group 2 (PED). Options for ATEX compliant blocks construction carbon steel or stainless steel.
The OLAER safety unit has the functions of safety shut-off, block and discharge of the hydropneumatic accumulator and the system to which it is connected. It meets international safety regulations and specifications for hydropneumatic accumulators, in particular the pressure vessel regulations in force in Germany.
Available on backorder
Sale
OLAER/PARKER Standard Accumulator Safety Block (DI 20 EY S 6 350 C V 24VDC)
£360.00
Safety Blocks
Are designed to incorporate in a single compact block a variety of functions necessary for the correct operation of a hydraulic system fitted with accumulators. This includes manual and/or electrical drain, isolation, flow control and pressure relief. Channel cross section : 10 mm (DI 10 block), 16 mm (DI 16 block), 20 mm (DI 20 block), 24 mm (DI 24 block), 32 mm (DI 32 block). Maximum working pressure : 330 to 690 Bar depending on models. According with the fluids of group 2 (PED). Options for ATEX compliant blocks construction carbon steel or stainless steel.
The OLAER safety unit has the functions of safety shut-off, block and discharge of the hydropneumatic accumulator and the system to which it is connected. It meets international safety regulations and specifications for hydropneumatic accumulators, in particular the pressure vessel regulations in force in Germany.
Available on backorder
Sale
OLAER/PARKER Standard Accumulator Safety Block (DI 24 EY S 6 350 C V 24VDC)
£360.00
Safety Blocks
Are designed to incorporate in a single compact block a variety of functions necessary for the correct operation of a hydraulic system fitted with accumulators. This includes manual and/or electrical drain, isolation, flow control and pressure relief. Channel cross section : 10 mm (DI 10 block), 16 mm (DI 16 block), 20 mm (DI 20 block), 24 mm (DI 24 block), 32 mm (DI 32 block). Maximum working pressure : 330 to 690 Bar depending on models. According with the fluids of group 2 (PED). Options for ATEX compliant blocks construction carbon steel or stainless steel.
The OLAER safety unit has the functions of safety shut-off, block and discharge of the hydropneumatic accumulator and the system to which it is connected. It meets international safety regulations and specifications for hydropneumatic accumulators, in particular the pressure vessel regulations in force in Germany.