Available on backorder
EPE Diaphragm Standard Accumulator (AMW-3.5-P-250-C-C2-0-M)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids, for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases. A flexible rubber separator i.e., diaphragm is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the diaphragm through a pressure valve to a pressure P . The diaphragm expands, filling the entire volume V of the accumulator shell. When the system (circuit) pressure P is higher than the gas 1 precharge pressure P , the liquid enters the shell and the diaphragm is compressed reducing the gas volume to V .1 Should the liquid pressure rise to P , the volume of gas 2 reduces to V with an attendant rise in pressure, thus 2 balancing the Liquid pressure. A potential energy is now stored in the accumulator to be utilized whenever needed.
SPECIFICATION
Material of Construction
Body : Carbon Steel-Painted or Low Temp Carbon Steel or Stainless Steel.
Diaphragm : Nitrile(NBR) or Epichlorohydrin(ECO) orViton (FKM). Others on request.
Diaphragm Plug : Plastic (Standard) or CS or SS. Connections
Gas Side : M28x1.5(M) or Dia 8 or 5/16” UNEF/Vg8. Others on request.
Fluid Side : Female Threaded or Combination Thread (M+F) or SAE Ports. Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-0.2-P-330-CG01)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-0.7-P-330-CG01)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
Sale
EPE Standard Bladder Accumulator (AS-1-P-360-CG01)
£487.20
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM .
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-10-P-360-CG01)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ....
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-15-P-360-CG01)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ....
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-20-P-360-CG01)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ....
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-25-P-360-CG01)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ....
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-35-P-360-CG01)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ....
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-5-P-360-CG01)
A hydro-pneumatic accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ....
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE Standard Bladder Accumulator (AS-55-P-360-CG01)
Accumulator is a device used specifically for storage of liquid under pressure. As liquids,for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases.
A flexible rubber separator i.e.,bladder is fitted into the accumulator shell. An inert gas - nitrogen - is filled into the bladder through a pressure valve to a pressure P . The bladder expands, filling 0 the entire volume V of the accumulator shell. 0 When the system pressure P is higher than the gas 1
precharge pressure P , the liquid enters the accumulator and the bladder is compressed reducing the gas volume toV1. Should the liquid pressure rise to P , the volume of gas reduces to V with an attendant rise in pressure, thus balancing the Liquid pressure.
A potential energy is now stored in the accumulator to be utilized whenever needed.
Specifications
Material of Construction
Body : Carbon Steel / Stainless Steel.
Bladder : Nitrile(NBR) / Butyl (IIR) /
Viton (FKM) / EPDM ....
others listed on ordering code.
Connections
Gas Side : 5/8” UNF / 1/4” BSP /
5/16” UNEF/Vg8 / 7/8” UNF.
Others on request.
Fluid Side : Female Threaded or
Flanged. Others on request.
Paint-CS Accumulators : Externally painted in RAL-5010.
Others on request.
Available on backorder
EPE STANDARD PISTON TYPE ACCUMULATORS (AP Series)
Send Inquiry - Sales@hydronexgen.com
A piston accumulator is a device used specifically for storage of liquid under pressure. As liquids, for all practical purposes, are incompressible, this objective is achieved by utilizing the compressibility of gases. A floating piston is fitted into the accumulator tube. An inert gas - nitrogen- is filled into the gas side through a pressure valve to a pressure P . The piston moves to the 0 bottom end, filling the entire volume V of the accumulator. 0 When the system pressure P is higher than the gas 1 precharge pressure P , the liquid enters the accumulator 0 and the piston is moved towards the gas side compressing and reducing the gas volume to V .1 Should the liquid pressure rise to P , the volume of gas 2 reduces to V with an attendant rise in pressure, thus 2 balancing the Liquid pressure. A potential energy is now stored in the accumulator to be utilized whenever needed.